Rainman™ Elite - domestic rainwater harvesting

Rainman™ Elite System features

• Complete system package, pre assembled where possible made easy to install
• In house controls, back plate mounted components wired and plumbed, require mains electrical cable on/off spur connection and 15mm mains water supply connection only
• Submersible pump with floating extraction hose, filter sieve and ball. Rubber delivery hose from pump to MDPE delivery pipe. Quick hose connectors c/w brass screw rubber Ö ring type fitting and right angle MDPE push and twist connection
• Tank c/w integrated calmed inlet, gravity two step cross-flow self cleaning filter system and siphon overflow c/w rodent barrier
• Push fit tank connections for standard 110mm underground drainage pipe work, rainwater in, overflow out and service duct to house
• Telescopic access dome to finished levels, 600mm dia free access with x 3 star head bolts securing cover
• Tank robust design, place on 150mm bed of sand, back fill with spoil taken out (not clay or sharp stones)

MicroRain microprocessor, 32 character display, supports;

• Timed auto filter wash
• Timed auto run of system components
• Enables manual run of system components
• Pump start/stop, through pressure/flow sensors (no moving parts)
• Pump run dry protection, system shut down
• Error message display, pressure side leak
• Error message display, pressure side pipe break, system shut down

R I M (Remote Integrated Measurement)

• Display tank volume (Hydraulic conversion to tank volume display)
• Maintains tank minimum water level through mains water solenoid valve.